RELAIS POUR CLIGNOTANTES MOTO KELLERMANN 123965

Flashing relay R 1

 

– ECE-tested

– Easy installation in the cable to the turn signal switch

– Possibility of connection for the flashing light

– Prevents the non-actuated blinkers from flashing

– Load independent / quiet flash sequence (75 / min)

– Very small dimensions 21 x 11 x 6 [mm] (L / W / H)

– Suitable for turn signals

– Suitable for 6 and 12 Volt Borders

 

The flashing relay R 1 has very small dimensions, always flashes with 75 pulse pulses per minute and has a connection possibility for the flashing light. It is simply installed in the line leading to the turn signal switch or replaced with the original turn signal relay. It is therefore suitable for all motorcycles with blinkers. If the non-actuated indicators flash unintended after a conversion to LED indicators, the flashing control light must be connected to the R 1. The ‘warning flash’ effect is reliably eliminated in this way. The scope of delivery includes all necessary components for installation.